I conclude this section on the COSO 2013 Internal Controls Framework by considering what COSO says about assessing compliance internal controls. In its Illustrative Guide, entitled “Internal Controls – Integrated Framework, Illustrative Tools for Assessing Effectiveness of a System of Internal Controls” (herein ‘the Illustrative Guide’), COSO laid out its views on “how to assess the effectiveness of its internal controls”. It went on to note, “An effective system of internal controls provides reasonable assurance of achievement of the entity’s objectives, relating to operations, reporting and compliance.” Moreover, there are two over-arching requirements that can only be met through such a structured post. First, each of the five components are present and functioning. Second, are the five components “operating together in an integrated approach”. One of the most critical components of the COSO Framework is that it sets internal control standards against those which you can audit to assess the strength of your compliance internal control.
As the COSO 2013 Framework is designed to apply to a wider variety of corporate entities, your audit should be designed to test your internal controls. This means that if you have a multi-country or business unit organization, you need to determine how your compliance internal controls are inter-related up and down the organization. The Illustrative Guide also realizes that smaller companies may have less formal structures in place throughout the organization. Your auditing can and should reflect this business reality. Finally, if your company relies heavily on technology for your compliance function, you can leverage that technology to “support the ongoing assessment and evaluation” program going forward.
The Illustrative Guide suggests using a four-pronged approach in your assessment. (1) Make an overall assessment of your company’s system of internal controls. This should include an analysis of “whether each of the components and relevant principles is present and functioning and the components are operating together in an integrated manner.” (2) There should be a component evaluation. Here you need to more deeply evaluate any deficiencies that you may turn up and whether or not there are any compensating internal controls. (3) Assess whether each principle is present and functioning. As the COSO 2013 Framework does not prescribe “specific controls that must be selected, developed and deployed” your task here is to look at the main characteristics of each principle, as further defined in the points of focus, and then determine if a deficiency exists and it so what is the severity of the deficiency. (4) Finally, you should summarize all your internal control deficiencies in a log so they are addressed on a structured basis.
Another way to think through the approach could be to consider “the controls to effect the principle” and would allow internal control deficiencies to be “identified along with an initial severity determination.” A Component Evaluation would “roll up the results of the component’s principle evaluations” and would allow a re-evaluation of the severity of any deficiency in the context of compensating controls. Lastly, an overall Effectiveness Assessment that would look at whether the controls were “operating together in an integrated manner by evaluating any internal control deficiencies aggregate to a major deficiency.” This type of process would then lend itself to an ongoing evaluation so that if business models, laws, regulations or other situations changed, you could assess if your internal controls were up to the new situations or needed adjustment.
The Illustrative Guide spent a fair amount of time discussing deficiencies. Initially it defined ‘internal control deficiency’ as a “shortcoming in a component or components and relevant principle(s) that reduces the likelihood of an entity achieving its objectives.” It went onto define ‘major deficiency’ as an “internal control deficiency or combination of deficiencies that severely reduces the likelihood that an entity can achieve its objectives.” Having a major deficiency is a significant issue because “When a major deficiency exists, the organization cannot conclude that it has met the requirements for an effective system of internal control.” Moreover, unlike deficiencies, “a major deficiency in one component cannot be mitigated to an acceptable level by the presence and functioning of another component.”
Under a compliance regime, you may be faced with known or relevant criteria to classify any deficiency. For example, if written policies do not have at a minimum the categories of policies laid out in the FCPA 2012 Guidance, which states “the nature and extent of transactions with foreign governments, including payments to foreign officials; use of third parties; gifts, travel, and entertainment expenses; charitable and political donations; and facilitating and expediting payments”, also formulated in the Illustrative Guide, such a finding would preclude management from “concluding that the entity has met the requirements for effective internal controls in accordance with the Framework.”
However, if there are no objective criteria, as laid out in the FCPA 2012 Guidance, to evaluate your company’s compliance internal controls, what steps should you take? The Illustrative Guide says that a business’ senior management, with appropriate board oversight, “may establish objective criteria for evaluating internal control deficiencies and for how deficiencies should be reported to those responsible for achieving those objectives.” Together with appropriate auditing boundaries set by either established law, regulation or standard, or through management exercising its judgment, you can then make a full determination of “whether each of the components and relevant principles is present and functioning and components are operating together, and ultimately in concluding on the effectiveness of the entity’s system of internal control.”
The Illustrative Guide has a useful set of templates that can serve as the basis for your reporting results. They are specifically designed to “support an assessment of the effectiveness of a system of internal control and help document such an assessment.” The Document, Document, and Document feature is critical in any best practices anti-corruption or anti-bribery compliance program whether based upon the FCPA, UK Bribery Act or some other regulation. With the Illustrative Guide COSO has given the compliance practitioner a very useful road map to begin an analysis into your company’s internal compliance controls. When the SEC comes knocking this is precisely the type of evidence they will be looking for to evaluate if your company has met its obligations under the FCPA’s internal controls provisions.
First are some general definitions that you need to consider in your evaluation. A compliance internal control must be both present and functioning. A control is present if the “components and relevant principles exist in the design and implementation of the system of [compliance] internal control to achieve the specified objective.” A compliance internal control is functioning if the “components and relevant principles continue to exist in the conduct of the system of [compliance] internal controls to achieve specified objectives.”
Three Key Takeaways
- An effective system of internal controls provides reasonable assurance of achievement of the entity’s objectives, relating to operations, reporting and compliance.
- There are two over-arching requirements for effective internal controls. First, each of the five components are present and function. Second, are the five components operating together in an integrated approach.
- For an anti-corruption compliance program you can use the Tem Hallmarks of an Effective Compliance Program as your guide to test against.
For more information on how to improve your internal controls management process, visit this month’s sponsor Workiva at workiva.com.